The Cisco® CRS-1 Carrier Routing System is the industry's first carrier router offering continuous system operation, unprecedented service flexibility, and system longevity. The Cisco CRS-1 is powered by Cisco IOS® XR Software-a unique self-healing, distributed operating system designed for always-on operation while scaling system capacity up to 92 Tbps. The innovative system architecture combines the Cisco Silicon Packet Processor, the first programmable 40-Gbps application-specific integrated circuit (ASIC), with the Cisco Service Separation Architecture for unprecedented service flexibility and speed to service. The Cisco CRS-1 marks a new era in carrier IP Communications by powering the foundation for network and service convergence today while protecting investments for decades to come.
This data sheet provides detailed product specifications for the Cisco CRS-1 4-Port OC-192c/STM-64c POS/DPT Interface Module. For more information about the Cisco CRS-1 or about other interfaces available for the Cisco CRS-1, visit:
Compatible with all current Cisco CRS-1 line-card chassis
Software Compatibility
Cisco IOS® XR Software Release 2.0 & 3.0 or higher
Protocols
• Packet over Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH)
• RFC 1619/2615, Point-to-Point Protocol (PPP) over SONET/SDH
• RFC 1662, PPP in High-Level Data Link Control (HDLC)-like framing
• RFC 2615, PPP over SONET/SDH
• HDLC
Port Density
• Four ports of OC-192/STM-64 POS interfaces per physical layer interface module (PLIM) slot
• All four ports have same optical reach (very short reach [VSR], short reach [SR], intermediate reach [IR], or long reach [LR]) (LR supported in 3.0 or higher)
Layer1/Layer 2 Feature Summary
• Supports a maximum transmission unit (MTU) of up to 9188 bytes
• Layer 2 encapsulations: HDLC, PPP; no subinterface support
• Error counts for B1, B2, B3
• Threshold-crossing alerts (TCAs), far end block error path (FEBE) for B1, B2, and B3 with threshold that can be set
• Loss of signal (LOS), loss of frame (LOF), line alarm indicator signal (LAIS), path alarm indicator signal (PAIS), loss of pointer (LOP), line remote defect indicator (LRDI), path remote defect indicator (PRDI), signal failure (SF), signal degrade (SD), line remote error indicator (line FEBE), and path remote error indicator (path FEBE)
• Performance monitoring-Error counts for B1, B2, B3, TCAs, and FEBE for B1, B2, or B3 with threshold that can be set
• Synchronization
• Local (internal) or loop-timed (recovered from network)
• Stratum 3 clock accuracy over full operating temperature
• Pointer activity monitoring
• Local (diagnostic) and line (network) loopback
• Payload mapping
• 1 + X^43 self-synchronous scrambler
• Power and input current monitoring
Reliability and Availability
Online insertion and removal (OIR) enabling installation and removal without affecting system traffic
• Storage Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Temperature:
– Normal: 5°C to 40°C (41°F to 104°F)
– Short term: -5°C to 50°C (23°F to 122°F) short term
• Relative Humidity:
– Normal: 5% to 85%
– Short-term: 5% to 90% but not to exceed 0.024 kg water/kg of dry air
Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This refers to a total of 360 hours in any given year, but, no more than 15 occurrences during that 1 year period.)
APPROVALS AND COMPLIANCE
Table 2. Compliance and Agency Approvals
Feature
Description
Safety Standards
• UL/CSA/IEC/EN 60950-1
• IEC/EN 60825 Laser Safety
• ACA TS001
• AS/NZS 60950
• FDA-Code of Federal Regulations Laser Safety
EMI
• FCC Class A
• ICES 003 Class A
• AS/NZS 3548 Class A
• CISPR 22 (EN55022) Class A
• VCCI Class A
• BSMI Class A
• IEC/EN 61000-3-2: Power Line Harmonics
• IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
Cisco offers numerous innovative services programs to accelerate customer success. These programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, visit:
